Brother CS5055PRW - Removal of Drop Knob

3 - 28
Application of Disassembly
Feed and rotary module
12 Removal of Drop knob
1. Remove the 3 retaining rings E3.
2. Pull the vertical feed shaft 1, and then remove the washer plain 2, the
spring and the vertical lever 3.
3. Remove the retaining ring E3 from the vertical feed shaft 1.
4. Remove the drop knob 4 from the base plate assy..
*Key point
• Remove it while lifting the section 6 of the drop knob 4 to get
over the boss part 5 of the base plate assy..
1
Retaining ring E3
Retaining ring E3
1
4
56
S04
2
34
S04