Brother CS5055PRW - Removal of FPM Holder Sub Assy; Removal of Spring

3 - 25
Feed and rotary module
Application of Disassembly
Application
4 Removal of Spring
1. Remove the spring .
S07
S07
5 Removal of FPM holder sub assy
1. Remove the screw 1.
2. Remove the screw 2, and then remove spring .
3. Remove the retaining ring 10, and then remove the FPM holder sub assy.
1 from the base plate assy..
4. Remove the rubber 2 from the FPM holder sub assy. 1.
2
Retaining ring 10
1
2
S06
2
1
1
S06