Brother DCP-145C - Colour Enhancement

Printing photos from a memory card or USB Flash memory drive
37
5
Colour Enhancement 5
You can turn on the colour enhancement
feature to print more vivid images.
Brightness 5
a Press Menu.
b Press a or b to choose
2.PhotoCapture.
Press OK.
c Press a or b to choose
5.Color Enhance.
Press OK.
d Press a or b to choose On (or Off).
Press OK.
 If you choose Off, then go to g.
e Press a or b to choose 1.Brightness.
Press OK.
f Press a or b to make a lighter or darker
print.
Press OK.
g Press Stop/Exit.
Contrast 5
You can select the contrast setting. More
contrast will make an image look sharper and
more vivid.
a Press Menu.
b Press a or b to choose
2.PhotoCapture.
Press OK.
c Press a or b to choose
5.Color Enhance.
Press OK.
d Press a or b to choose On (or Off).
Press OK.
 If you choose Off, then go to g.
e Press a or b to choose 2.Contrast.
Press OK.
f Press a or b to increase or decrease the
contrast.
Press OK.
g Press Stop/Exit.
White Balance 5
You can adjust the white areas of an image
and bring them back to pure white.
a Press Menu.
b Press a or b to choose
2.PhotoCapture.
Press OK.
c Press a or b to choose
5.Color Enhance.
Press OK.
d Press a or b to choose On (or Off).
Press OK.
 If you choose Off, then go to g.
e Press a or b to choose
3.White Balance.
Press OK.
f Press a or b to adjust the degree of the
balance.
Press OK.
g Press Stop/Exit.