2
2
Load plain Letter/A4
paper
a Pull the paper tray a completely out of the
machine.
b Lift the output paper tray cover a.
c With both hands, gently press and slide the
paper side guides a and then the paper length
guide b to fit the paper size.
Make sure that the triangular marks c on the
paper side guides a and paper length guide b
line up with the mark for the paper size you are
using.
d Fan the stack of paper well to avoid paper jams
and misfeeds.
e Gently put the paper into the paper tray print
side down and top edge first. Check that the
paper is flat in the tray.
Note
• The components included in the box may differ
depending on your country.
• Save all packing materials and the box in case
for any reason you must ship your machine.
• You need to purchase the correct interface
cable for the interface you want to use (for USB
or network connection).
USB cable
Please make sure you use a USB 2.0 cable (Type
A/B) that is no more than 6 feet (2 meters) long
(cable not included).
Network cable
Use a straight-through Category5 (or greater)
twisted-pair cable for 10BASE-T or 100BASE-TX
Fast Ethernet Network.
1
1
IMPORTANT
DO NOT push the paper in too far.
1
3
3
2
To Next Page
Loading...
