To Next Page
S
Shane ChapmanSep 19, 2025
How to fix OCR issues on Brother Copier?
- BBrittany TuckerSep 22, 2025
If OCR (Optical Character Recognition) isn't working on your Brother Copier, try increasing the scanner resolution.
How to fix OCR issues on Brother Copier?
If OCR (Optical Character Recognition) isn't working on your Brother Copier, try increasing the scanner resolution.
Why is my Brother Copier print quality so poor?
If you're experiencing poor print quality with your Brother Copier, consider the following: * Use genuine Brother consumables, as other inks can cause quality issues. * Ensure the Media Type setting in the printer driver or the Paper Type setting in the copier's menu matches the paper you're using. * Make sure your ink cartridges are fresh. Expired or improperly stored cartridges can cause clogs. * Try using the recommended types of paper. * Ensure that the environment is between 20° C to 33° C.
How to remove vertical streaks on Brother Copier copies?
If you notice vertical black lines or streaks on your Brother Copier copies, it's likely due to dirt or correction fluid on the scanner. Clean the scanner glass and the white plastic above it.
What to do if white horizontal lines appear on Brother Copier prints?
If you're seeing white horizontal lines in your Brother Copier's printouts, try these solutions: * Clean the print head. * Ensure you are using Brother Original Innobella™ ink. * Try using the correct types of paper. * If printing on Photo L or 10 × 15 cm paper, use the photo paper tray.
What to do if Brother Copier software won't install?
If you can't install software or print with your Brother Copier, run the Repair MFL-Pro Suite program on the CD-ROM. This program will repair and reinstall the software.
Why can't I print from FaceFilter Studio with Brother Copier?
To print images from FaceFilter Studio with your Brother Copier, you must install the FaceFilter Studio application from the CD-ROM supplied with your machine. Before starting FaceFilter Studio for the first time, ensure your Brother machine is turned On and connected to your computer to access all functions.
How to prevent stains on the back of Brother Copier prints?
If you're seeing stains on the reverse side or at the bottom of the page from your Brother Copier: * Make sure the printer platen is not dirty with ink. * Ensure you are using the paper support flap.
How to resolve stacked characters on Brother Copier?
If characters and lines are stacked when printing with your Brother Copier, check the printing alignment.
How to fix Brother Copier network printing issues?
If you cannot print over the network with your Brother Copier, ensure that your machine is powered on, online, and in Ready mode. Reconnect the LAN cable to the hub to verify the cabling and network connections are good. If possible, try connecting the machine to a different port on your hub using a different cable. If the connections are good, the machine shows LAN Active for 2 seconds.
Why does my Brother Copier print dense lines?
If your Brother Copier is printing dense lines on the page, check Reverse Order in the Basic tab of the printer driver.
General| Print Technology | Inkjet |
|---|---|
| Scanner Type | Flatbed |
| Scan Resolution | 1200 x 2400 dpi |
| Display | LCD |
| Interface | USB 2.0 |
| Paper Handling | 100-sheet input tray |
| Memory | 32 MB |
| Maximum Print Resolution | 6000 x 1200 dpi |
| Copy Speed Color | 20 cpm |
| Copy Resolution | 1200 x 1200 dpi |
| Media Types | Plain paper, glossy paper |
| Functions | Print, scan, copy |
| Paper Sizes | A4, Letter, A5, A6, Envelopes |
| Ink Cartridge | LC51 (Black, Cyan, Magenta, Yellow) |
