How to avoid smudges on corner of Brother Copier prints?
To avoid smudged stains at the right or left corner of pages printed on your Brother Copier, make sure the paper is not curled when you print on the back side of the paper using the Print Odd Pages and Print Even Pages settings.
How to prevent smudges at the top of Brother Copier prints?
If you notice a smudged stain at the top center of pages printed by your Brother Copier, make sure the paper isn't too thick or curled.
How to increase print speed on Brother Copier?
If your Brother Copier's print speed is too slow: * Try changing the printer driver setting. The highest resolution requires longer processing time. Experiment with other quality settings in the printer driver's Advanced tab and uncheck Colour Enhancement. * Turn off the borderless feature, as it's slower than normal printing.
What causes my Brother Copier to print blank pages?
If your Brother Copier is printing blank pages, try cleaning the print head.
Why does my Brother Copier printing appear dirty?
If your Brother Copier's printing appears dirty or the ink seems to run, check these items: * Make sure you're using the recommended types of paper and avoid handling the paper until the ink is dry. * If using photo paper, verify you've set the correct paper type in the printer driver's Basic tab. * Ensure you're using Brother Original Innobella™ ink.
What to do if white horizontal lines appear on Brother Copier prints?
If you're seeing white horizontal lines in your Brother Copier's printouts, try these solutions: * Clean the print head. * Ensure you are using Brother Original Innobella™ ink. * Try using the correct types of paper. * If printing on Photo L or 10 × 15 cm paper, use the photo paper tray.
How to remove vertical streaks on Brother Copier copies?
If you notice vertical black lines or streaks on your Brother Copier copies, it's likely due to dirt or correction fluid on the scanner. Clean the scanner glass and the white plastic above it.
Why is my Brother Copier print quality so poor?
If you're experiencing poor print quality with your Brother Copier, consider the following: * Use genuine Brother consumables, as other inks can cause quality issues. * Ensure the Media Type setting in the printer driver or the Paper Type setting in the copier's menu matches the paper you're using. * Make sure your ink cartridges are fresh. Expired or improperly stored cartridges can cause clogs. * Try using the recommended types of paper. * Ensure that the environment is between 20° C to 33° C.
General| Print Technology | Inkjet |
|---|---|
| Scanner Type | Flatbed |
| Scan Resolution | 1200 x 2400 dpi |
| Display | LCD |
| Interface | USB 2.0 |
| Paper Handling | 100-sheet input tray |
| Memory | 32 MB |
| Maximum Print Resolution | 6000 x 1200 dpi |
| Copy Speed Color | 20 cpm |
| Copy Resolution | 1200 x 1200 dpi |
| Media Types | Plain paper, glossy paper |
| Functions | Print, scan, copy |
| Paper Sizes | A4, Letter, A5, A6, Envelopes |
| Ink Cartridge | LC51 (Black, Cyan, Magenta, Yellow) |
To Next Page
