26
4
How to copy 4
Making a single copy 4
a Load your document.
(See Loading documents on page 20.)
b Press Mono Start or Colour Start.
Making multiple copies 4
You can make up to 99 copies in one print
run.
a Load your document.
(See Loading documents on page 20.)
b Press + or - repeatedly until the number
of copies you want appears (up to 99).
c Press Mono Start or Colour Start.
Stop copying 4
To stop copying, press Stop/Exit.
Copy options 4
You can change the copy settings from the
default display. The LCD shows:
1 No of Copies
You can enter the number of copies you want
by pressing + or - repeatedly.
Press a or b to scroll through the copy options
menu.
Quality (See page 27.)
Enlarge/Reduce (See page 27.)
Paper Type (See page 30.)
Paper Size (See page 30.)
Brightness (See page 29.)
Contrast (See page 29.)
Page Layout (See page 28.)
Book Copy (See page 30.)
Watermark Copy (See page 31.)
Set New Default (See page 32.)
Factory Reset (See page 32.)
When the option you want is highlighted,
press OK.
Note
Book Copy and Watermark Copy
features are supported by technology
from Reallusion, Inc.
You can change the copy settings temporarily
for the next copy.
The machine returns to its default settings
after 1 minute.
Making copies 4
COPY Copy Press Start
Normal
100%
Enlarge/Reduce
Plain Paper
Paper
Type
Ratio:
Quality
01
1
To Next Page
Loading...
Need help?
General
