Brother DCP-385C User Manual

Printing photos from a memory card or USB Flash memory drive
47
5
Adjusting Brightness,
Contrast and Colour 5
Brightness 5
a Press a or b to choose Brightness.
b Press d or c to make a darker or lighter
print.
Press OK.
c If you do not want to change additional
settings, press Colour Start to print.
Contrast 5
You can choose the contrast setting. More
contrast will make an image look sharper and
more vivid.
a Press a or b to choose Contrast.
b Press d to c to change the contrast.
Press OK.
c If you do not want to change additional
settings, press Colour Start to print.
Colour Enhancement 5
You can turn on the colour enhancement
feature to print more vivid images. Printing
time will be slower.
a Press a or b to choose
Color Enhance .
Press OK.
b Do one of the following:
 If you want to customize the White
Balance, Sharpness or Colour
Density, press d or c to choose On,
and then go to step c.
 If you do not want to customize,
press d or c to choose Off.
Press OK and then go to step f.
c Press a or b to choose
White Balance , Sharpness or
Color Density .
d Press d or c to adjust the degree of the
setting.
Press OK.
e Do one of the following:
 If you want to customize another
colour enhancement, press a or b to
choose another option.
 If you want to change other settings,
press a or b to choose Exit, and
then press OK.
f If you do not want to change additional
settings, press Colour Start to print.
Note
• White Balance
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will effect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other colour. By using this setting,
you can correct that effect and bring the
white areas back to pure white.
• Sharpness
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
• Colour Density
This setting adjusts the total amount of
colour in the image. You can increase or
decrease the amount of colour in an
image to improve a washed out or weak
picture.

Brother DCP-385C Specifications

General

Print Technology	Inkjet
Scanner Type	Flatbed
Scan Resolution	1200 x 2400 dpi
Display	LCD
Interface	USB 2.0
Paper Handling	100-sheet input tray
Memory	32 MB
Maximum Print Resolution	6000 x 1200 dpi
Copy Speed Color	20 cpm
Copy Resolution	1200 x 1200 dpi
Media Types	Plain paper, glossy paper
Functions	Print, scan, copy
Paper Sizes	A4, Letter, A5, A6, Envelopes
Ink Cartridge	LC51 (Black, Cyan, Magenta, Yellow)