General Information
7
1
7 Ink Management
Lets you clean the print head, check the print
quality, and check the available ink volume.
8 Mode keys:
Scan
Lets you access Scan mode.
Photo Capture
Lets you access PhotoCapture Center™
mode.
9 Warning LED
Turns orange and blinks when the LCD
displays an error or an important status
message.
Note
Most of the illustrations in this User’s Guide
show the DCP-385C.
LCD display indications 1
The LCD display screen shows the mode the
machine is in, the current settings, and the
available ink volume.
1 Wireless Status (DCP-585CW only)
A four level indicator shows the current
wireless signal strength if you are using a
wireless connection.
2 Ink indicator
Lets you see the available ink volume.
Basic Operations 1
The following steps show how to change a
setting in the machine. In this example the
Paper Type setting is changed from
Plain Paper to Inkjet Paper .
a Press Menu.
b Press a or b to choose
General Setup .
Press OK.
c Press a or b to choose Paper Type.
d Press d or c to choose Inkjet Paper.
Press OK.
You can see the current setting on the
LCD:
e Press Stop/Exit.
0Max
Mem.
Normal
100%
Enlarge/Reduce
Plain Paper
Paper
Type
Ratio:
Quality
Mem.
01
2
1
MENU
Network
Machine Info.
Initial Setup
Print Reports
Select & Press
OK
General Setup
General Setup
MENU
Select & Press
OK
Paper
Type
Paper Size
Inkjet Paper
A4
10
Mins
LCD Settings
Sleep Mode
To Next Page
Loading...
Need help?
General
