To Next PageTo Next PageWhy is the network scanning feature not working on my Brother Copier?
For Windows users, if the network scanning feature on your Brother Copier isn't working, firewall settings on your PC may be rejecting the necessary network connection. Configure the Firewall. If you are using personal Firewall software, see the User’s Guide for your software or contact the software manufacturer.
Why is my Brother Copier print quality so poor?
If you're experiencing poor print quality with your Brother Copier, consider the following: * Use genuine Brother consumables, as other inks can cause quality issues. * Ensure the Media Type setting in the printer driver or the Paper Type setting in the copier's menu matches the paper you're using. * Make sure your ink cartridges are fresh. Expired or improperly stored cartridges can cause clogs. * Try using the recommended types of paper. * Ensure that the environment is between 20° C to 33° C.
How to remove vertical streaks on Brother Copier copies?
If you notice vertical black lines or streaks on your Brother Copier copies, it's likely due to dirt or correction fluid on the scanner. Clean the scanner glass and the white plastic above it.
What to do if white horizontal lines appear on Brother Copier prints?
If you're seeing white horizontal lines in your Brother Copier's printouts, try these solutions: * Clean the print head. * Ensure you are using Brother Original Innobella™ ink. * Try using the correct types of paper. * If printing on Photo L or 10 × 15 cm paper, use the photo paper tray.
Why does my Brother Copier printing appear dirty?
If your Brother Copier's printing appears dirty or the ink seems to run, check these items: * Make sure you're using the recommended types of paper and avoid handling the paper until the ink is dry. * If using photo paper, verify you've set the correct paper type in the printer driver's Basic tab. * Ensure you're using Brother Original Innobella™ ink.
What causes my Brother Copier to print blank pages?
If your Brother Copier is printing blank pages, try cleaning the print head.
How to prevent stains on the back of Brother Copier prints?
If you're seeing stains on the reverse side or at the bottom of the page from your Brother Copier: * Make sure the printer platen is not dirty with ink. * Ensure you are using the paper support flap.
What to do if computer cannot find Brother Copier?
If your computer cannot find your Brother Copier: * For Windows users, firewall settings on your PC may be rejecting the necessary network connection. * For Macintosh users, re-select your machine in the Device Selector application or from the model list in ControlCenter2.
How to fix Brother Copier network printing issues?
If you cannot print over the network with your Brother Copier, ensure that your machine is powered on, online, and in Ready mode. Reconnect the LAN cable to the hub to verify the cabling and network connections are good. If possible, try connecting the machine to a different port on your hub using a different cable. If the connections are good, the machine shows LAN Active for 2 seconds.
Why does my Brother Copier print dense lines?
If your Brother Copier is printing dense lines on the page, check Reverse Order in the Basic tab of the printer driver.
General| Print Technology | Inkjet |
|---|---|
| Scanner Type | Flatbed |
| Scan Resolution | 1200 x 2400 dpi |
| Display | LCD |
| Interface | USB 2.0 |
| Paper Handling | 100-sheet input tray |
| Memory | 32 MB |
| Maximum Print Resolution | 6000 x 1200 dpi |
| Copy Speed Color | 20 cpm |
| Copy Resolution | 1200 x 1200 dpi |
| Media Types | Plain paper, glossy paper |
| Functions | Print, scan, copy |
| Paper Sizes | A4, Letter, A5, A6, Envelopes |
| Ink Cartridge | LC51 (Black, Cyan, Magenta, Yellow) |
