EasyManuals Logo

Brother DCP-385C User Manual

Brother DCP-385C
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
82
Cleaning the print head B
To maintain print quality, the machine will
automatically clean the print head when
needed. You can start the cleaning process
manually if there is a print quality problem.
Clean the print head and ink cartridges if you
get a horizontal line or blank text in the text or
graphics on your printed pages. You can
clean Black only, three colours at a time
(Yellow/Cyan/Magenta), or all four colours at
once.
Cleaning the print head consumes ink.
Cleaning too often uses ink unnecessarily.
CAUTION
DO NOT touch the print head. Touching the
print head may cause permanent damage
and may void the print head's warranty.
a Press Ink Management.
b Press a or b to choose Cleaning.
Press OK.
c Press a or b to choose Black, Color or
All.
Press OK.
The machine cleans the print head.
When cleaning is finished, the machine
will go back to standby mode
automatically.
Note
If you clean the print head at least five
times and the print has not improved, try
installing a new genuine Brother Branded
replacement cartridge for each problem
color. Try cleaning the print head again up
to five more times. If the print has not
improved call your Brother dealer.
Checking the print quality B
If faded or streaked colours and text appear
on your output, some of the nozzles may be
clogged. You can check this by printing the
Print Quality Check Sheet and looking at the
nozzle check pattern.
a Press Ink Management.
b Press a or b to choose Test Print.
Press OK.
c Press a or b to choose
Print Quality .
Press OK.
d Press Colour Start.
The machine begins printing the Print
Quality Check Sheet.
e Check the quality of the four colour
blocks on the sheet.
f Do one of the following:
If all lines are clear and visible, press
+ to choose Yes, and go to step j.
If you can see missing short lines as
shown below, press - to choose No.
g The LCD asks you if the print quality is
OK for black and three colours.
Press + (Yes) or - (No).
h The LCD asks you if you want to start
cleaning.
Press + (Yes).
The machine starts cleaning the print
head.
OK Poor

Table of Contents

Other manuals for Brother DCP-385C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother DCP-385C and is the answer not in the manual?

Brother DCP-385C Specifications

General IconGeneral
Print TechnologyInkjet
Scanner TypeFlatbed
Scan Resolution1200 x 2400 dpi
DisplayLCD
InterfaceUSB 2.0
Paper Handling100-sheet input tray
Memory32 MB
Maximum Print Resolution6000 x 1200 dpi
Copy Speed Color20 cpm
Copy Resolution1200 x 1200 dpi
Media TypesPlain paper, glossy paper
FunctionsPrint, scan, copy
Paper SizesA4, Letter, A5, A6, Envelopes
Ink CartridgeLC51 (Black, Cyan, Magenta, Yellow)

Related product manuals