Brother DCP-9010CN - How to Set a New Default for the File Size (for Scan to FTP and Network)

Network Scanning
205
12
How to set a new default for the file size
(For Scan to FTP and Network) 12
You can set your own default setting for the file size. For a higher quality scan, choose the large file size. For
a smaller file size, choose the small file size.
a Press Menu, 1, 8, 2.
b Press a or b to choose 1.Color or 2.Gray. Press OK.
c Press a or b to choose Small, Middle or Large. Press OK.
d Press Stop/Exit.
Note
You cannot choose the file size when you scan a document in black and white. Black and white documents
will be stored in the TIFF file format and the data will not be compressed.