Brother DCP-9010CN - Function Table and Default Factory Settings; MFC-9010 CN and DCP-9010 CN

Appendix B
209
B
Function table and default factory settings B
MFC-9010CN and DCP-9010CN B
The factory settings are shown in Bold with an asterisk.
Main menu Submenu Menu selections Options
4.Network 1.TCP/IP 1.Boot Method Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or DHCP, you will be
asked to enter how many times the machine tries to obtain
the IP address.)
2.IP Address [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
3.Subnet Mask [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
4.Gateway [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
5.Node Name BRNxxxxxxxxxxxx
(up to 32 characters)
6.WINS Config Auto*
Static
7.WINS Server Primary [000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
Secondary [000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
8.DNS Server Primary [000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
Secondary [000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]*
9.APIPA On*
Off