Brother dcp-9015cdw - 2-Sided Copying

Making copies
15
4
2-sided Copying 4
You must choose a 2-sided copy layout from
the following options before you can start
2-sided copying. The layout of your document
determines which 2-sided copy layout you
should choose.
Portrait
 1sidei2side Long Edge Flip
 1sidei2side Short Edge Flip
Landscape
 1sidei2side Long Edge Flip
 1sidei2side Short Edge Flip
a Load your document.
b Press (Copy).
c Enter the number of copies.
d Press Options.
e Swipe up or down, or press a or b to
display 2-sided Copy.
f Press 2-sided Copy.
g Press one of the following layout
options:
Off,
1-sided i 2-sided Long Edge Flip ,
1-sided i 2-sided Short Edge Flip
h If you do not want to change additional
settings, press OK.
i Press Colour Start or Mono Start
to scan the page.
(DCP-9020CDW)
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go
to step j.
j After the machine scans the page, press
Scan to scan the next page.
k Place the next page on the scanner
glass.
l Press OK.
Repeat steps j - l for each page of
the layout.
m After scanning all the pages, press
Complete in step j to finish.
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2