Troubleshooting and routine maintenance
115
C
d Hold the green parts of the belt unit with
both hands and lift the belt unit up, then
pull it out.
CAUTION
We recommend that you place the belt unit
on a clean, flat surface with a piece of
disposable paper underneath it in case you
accidentally spill or scatter toner.
e Unpack the new belt unit, and remove
the protective cover and paper.
f Put the new belt unit in the machine.
Match the h mark on the belt unit to the
g mark on the machine. Push down on
the green area of the belt unit to lock it in
place.
To Next Page
Loading...
