To Next PageTo Next Page
Why can't my computer find the Brother Print Server?
If your computer can't find the Brother Print Server, the firewall on your computer might be blocking the network connection. To resolve this, disable the firewall and reinstall the drivers.
What to do if Brother Print Server is not found during setup?
If the Brother Print Server isn't found during network print software installation or from the printer driver in Windows, ensure you've set up the IP address for the Brother Print Server as described in Chapter 2 of the User’s Guide before installing the network print software or printer driver. Also, make sure the machine is powered on, online, and ready to print. Print the Network Configuration List to verify that settings like the IP address are correct for your network. Verify that the print server is on your network. If problems persist, reset the print server to factory default settings and retry the initial setup. Also, the firewall on your computer may be blocking the necessary network connection to the machine, so disable the Firewall on your computer and reinstall the drivers.
Why is my print job not printing on the Brother Print Server?
If your print job isn't printing on the Brother Print Server, the issue might stem from mismatched or duplicate IP addresses. Confirm that the correct IP address is loaded into the print server. If this doesn't resolve the issue, reset the print server to its default factory settings and attempt the setup procedure again.
Why am I getting an error during printing with my Brother Print Server?
If you encounter an error during printing with the Brother Print Server, it might be because other users are printing large amounts of data. The printer may be unable to accept your print job until the ongoing printing is finished. Try executing the print job again after the other jobs are completed.
What to do if Brother Printer has connection failure between the machine and LT connector?
If you are experiencing a connection failure between your Brother printer and the LT connector, remove Tray 2 and then firmly push it back in.
What to do if Brother Printer has internal temperature sensor failure?
If your Brother printer is showing an internal temperature sensor failure, it could be due to a harness connection failure of the internal temperature sensor, in that case check the harness connection of the internal temperature sensor and reconnect it. Alternatively, it may be due to an Engine PCB failure, in that case replace the engine PCB ASSY.
What to do if Brother Printer shows Air intake fan (AIR) failure?
If your Brother printer indicates an air intake fan failure, try resolving the issue by turning the power off and then back on again.
What to do if Brother Printer shows Belt cleaner release sensor failure?
If your Brother printer is displaying a belt cleaner release sensor failure, a simple solution is to turn the power off and then back on again.
What to do if Brother Printer shows Develop drive motor failure?
If your Brother printer shows a develop drive motor failure, you can try to resolve the issue by turning the power off and then back on again.
What to do if Brother Printer shows Belt drive motor failure?
If your Brother printer shows a belt drive motor failure, you can try to resolve the issue by turning the power off and then back on again.
General| Print technology | Laser |
|---|---|
| Maximum resolution | 2400 x 600 DPI |
| Time to first page (black, normal) | 16 s |
| Time to first page (color, normal) | 17 s |
| Print speed (black, normal quality, A4/US Letter) | 20 ppm |
| Scan to | e-mail, file, image, OCR |
| Input color depth | 48 bit |
| Copier resize | 25 - 400 % |
| PC free copying | Yes |
| Maximum copy resolution | 1200 x 600 DPI |
| Maximum number of copies | 99 copies |
| N-in-1 copy function (N=) | 2, 4, 9, 16 |
| Time to first copy (color, normal) | 23 s |
| Copy speed (black, normal quality, A4) | 16 cpm |
| Total input capacity | 250 sheets |
| Total output capacity | 150 sheets |
| Multi-Purpose tray input capacity | 50 sheets |
| Auto document feeder (ADF) input capacity | 35 sheets |
| Internal memory | 64 MB |
| Maximum internal memory | 576 MB |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 54.5 dB |
| Display | LCD |
| Market positioning | Business |
| Media weight (tray 1) | 60 - 105g/m2 |
| Paper tray media types | Bond paper, Envelopes, Labels, Plain paper, Recycled paper |
| Non-ISO print media sizes | Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size) |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Font styles | 66 Scaleable fonts, 12 Bitmap fonts, 13 Barcodes |
| Dimensions (WxDxH) | 432 x 487 x 482 mm |
| Networking features | 10/100 Base-TX |
| All-in-one functions | Copy, Scan |
| Color all-in-one functions | copy, print, scan |
| Compatible operating systems | Windows 2000 Professional, XP Home Edition, XP Professional (32 & 64 bit ) Mac OS X 10.2.4 or greater Linux |
| Standard interfaces | USB 2.0 |
| Power consumption (standby) | 95 W |
| Power consumption (PowerSave) | 28 W |
| Power consumption (average operating) | 495 W |
| Package weight | 38600 g |
| Faxing | No |
