Brother DCP-9055CDN - Connect the Power Cord; Choose Your Language

5
4
Connect the power cord
a Connect the AC power cord to the machine,
and then plug it into an electrical socket.
b Remove the label covering the machine's
power switch, and then switch the machine on.
5
Choose your language
a After turning the power switch on, the LCD
shows:
Select Language
a English
Français
b Deutsch
Select ab or OK
Press a or b to choose your language and
press OK.
b The LCD prompts you to confirm your
selection.
Select Language
English
1.Yes
2.No
Enter Number
If the LCD shows the correct language,
press 1.
—OR—
Press 2 to go back to step a to choose the
language again.
IMPORTANT
DO NOT connect the interface
cable yet.
Note
If you have set the wrong language, you can
change the language from the control panel menu
of the machine. (Menu, 1, 0)