Brother DCP-9055CDN - Adjusting Contrast, Colour and Brightness

Making copies
13
3
Adjusting Contrast, Colour
and Brightness 3
Contrast 3
Adjust the contrast to help an image look
sharper and more vivid.
To temporarily change the contrast setting,
follow the steps below:
a Load your document.
b Use the numeric keys to enter the
number of copies (up to 99).
c Press Options.
Press a or b to choose Contrast.
Press OK.
d Press d or c to increase or decrease the
contrast.
Press OK.
e Press Mono Start or Colour Start.
To change the default setting follow the steps
below:
a Press Menu, 2, 3.
b Press d or c to increase or decrease the
contrast.
Press OK.
c Press Stop/Exit.
Brightness 3
Adjust the copy brightness to make copies
darker or lighter.
To temporarily change the copy brightness
setting, follow the steps below:
a Load your document.
b Use the numeric keys to enter the
number of copies (up to 99).
c Press Options.
Press a or b to choose Brightness.
Press OK.
d Press d or c to make a lighter copy or a
darker copy.
Press OK.
e Press Mono Start or Colour Start.
To change the default setting follow the steps
below:
a Press Menu, 2, 2.
b Press d or c to make a lighter copy or a
darker copy.
Press OK.
c Press Stop/Exit.
Colour Adjust (Saturation) 3
You can change the default setting for colour
saturation.
To change the default setting follow the steps
below:
a Press Menu, 2, 4.
b Press a or b to choose 1.Red,
2.Green, or 3.Blue.
Press OK.
c Press d or c to increase or decrease the
colour saturation.
Press OK.
d Return to step b to choose the next
colour. Or press Stop/Exit.