Only use the power cord supplied with this product (if included in the box).
Disconnect device
This product must be installed near an electrical socket that is easily accessible. In case of an
emergency, you must unplug the power cord from the electrical socket to shut off the power
completely.
Approval Information (MFC Models Only)
THIS EQUIPMENT IS DESIGNED TO WORK WITH A TWO WIRE ANALOGUE PSTN LINE
FITTED WITH THE APPROPRIATE CONNECTOR.
Brother advises that this product may not function correctly in a country other than where it was
originally purchased, and does not offer any warranty in the event that this product is used on
public telecommunication lines in another country.
Wiring Information (U.K. Only)
If you need to replace the fuse in the plug, fit a fuse that is approved by ASTA to BS1362 with
the same rating as the original fuse. Always replace the fuse cover. Never use a plug that does
not have a cover. If in any doubt, call a qualified electrician.
Warning - This product must be earthed.
The wires in the mains lead are coloured in line with the following code:
• Green and Yellow: Earth
• Blue: Neutral
• Brown: Live
Declaration of Conformity (Europe Only)
We, Brother Industries, Ltd.
15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561 Japan
declare that this product is in conformity with the essential requirements of all relevant directives
and regulations applied within the European Community.
The Declaration of Conformity (DoC) can be downloaded from our website. Visit
support.brother.com and:
→ select "Manuals"
12
To Next Page
Loading...
Need help?
General