When loading an envelope, or a sheet of thick paper, push the envelope into the manual feed slot until you
feel the paper feed rollers grab it.
6. Pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2).
• If the document does not fit on one sheet, the machine will prompt you to load another sheet of paper.
Place another sheet of paper in the manual feed slot, and then press [OK] on the machine's control
panel.
• Make sure printing has finished before you close the manual feed slot cover.
• When paper is placed in the manual feed slot, the machine always prints from the manual feed slot.
• The machine will eject paper loaded in the manual feed slot while a test page, fax, or report is being
printed.
• The machine will eject paper loaded in the manual feed slot during the machine's cleaning process.
Wait until the machine finishes its cleaning, and then load paper in the manual feed slot.
Related Information
• Load Paper
• About Envelopes
• Choose the Right Print Media
• Error and Maintenance Messages
29
To Next Page
Loading...
