Brother DCP-T510W - Page 505

Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features
Tables > Settings Tables (1.8"(44.9 mm) Colour LCD)
Settings Tables (1.8"(44.9 mm) Colour LCD)
Related Models: MFC-T910DW
These tables will help you understand your machine's menu selections and options.
Settings > [General Setup]
Level 1
Level 2 Level 3 Descriptions
Maintenance Impr.
PrintQuality
- Check and correct the print quality, alignment and
paper feeding according to the LCD instructions.
Print Head
Cleaning
- Clean the print head according to the LCD
instructions.
Ink Low Notice
- Set the machine to display the ink low messages.
Ink Bottle Model
- Check the ink bottle numbers.
Print Setting
Options
Reduce
Smudging
Reduce smudging on the paper or paper jams during
printing.
Slow Drying
Paper
Use this setting when printing with a type of plain
paper on which the ink dries very slowly.
Tray Setting Tray #1 Paper Type
Set the type of paper in the paper tray.
Paper Size
Set the size of paper in the paper tray.
MP Tray Paper Type
Set the type of paper in the paper tray.
Paper Size
Set the size of paper in the paper tray.
Tray Setting:
Copy
Tray Use
Select the tray to be used for copying.
Tray
Priority
When Auto is selected in Tray Use, select the order
in which the machine uses paper trays that contain
paper of the same size.
Tray Setting: Fax Tray Use
Select the tray to be used for faxing.
Tray
Priority
When Auto is selected in Tray Use, select the order
in which the machine uses paper trays that contain
paper of the same size.
Tray Setting:
Print
Tray
Priority
Select the order in which the machine uses paper
trays that contain paper of the same size.
Tray Setting:
Photo Print
(JPEG)
Tray Use
Select the tray to be used for photo printing.
Tray
Priority
When Auto is selected in Tray Use, select the order
in which the machine uses paper trays that contain
paper of the same size.
Check Paper
- Check the paper type and paper size when you pull
the tray out of the machine.
Quiet Mode
- - Decrease printing noise.
Volume Ring
- Adjust the ring volume.
Beep
- Adjust the beeper volume.
Speaker
- Adjust the speaker volume.
LCD Settings Backlight
- Adjust the brightness of the LCD backlight.
Dim Timer
- Set how long the LCD backlight stays on after you go
back to your Home screen.
499