Brother DCP-T510W - Page 508

Level 1 Level 2 Level 3 Descriptions
Wi-Fi Direct Status
Information
Status
View the current Wi-Fi Direct network status.
Signal
View the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner, the
LCD always indicates a strong signal.
I/F Enable
- Turn the Wi-Fi Direct connection on or off.
Web Connect
Settings
Proxy Settings Proxy Connection
Change the Web connection settings.
Address
Port
User Name
Password
Network I/F
- - Select the network connection type.
Network Reset
- - Restore all network settings back to the factory
settings.
Settings > [Print Reports]
Level 1
Descriptions
XMIT Verify
Print a Transmission Verification Report for your last transmission.
Address Book
Print a list of names and numbers stored in the Address Book.
Fax Journal
Print a list of information about your last 200 incoming and outgoing faxes.
(TX means Transmit. RX means Receive.)
User Settings
Print a list of your settings.
Network Config
Print a list of your Network settings.
WLAN Report
Print the wireless LAN connection results.
Settings > [Machine Info.]
Level 1
Descriptions
Serial No.
Check your machine's serial number.
Firmware Version
Check your machine's firmware version.
Firmware Update
Update your machine to the latest firmware.
Firmware Auto Check
View firmware information on the Home screen.
Page Counter
Display the printed pages.
Settings > [Initial Setup]
Level 1
Level 2 Descriptions
Date & Time Date
Add the date and time on the screen and in the headings of the
faxes you send.
Time
Auto Daylight
Set the machine to change automatically for Daylight Saving Time.
Station ID
- Enter your name and fax number so it appears on each page you
fax.
Tone/Pulse
(Available only for some
countries.)
- Select the dialling mode.
502