Brother DCP-T820DW - Page 465

Level 1 Level 2 Level 3 Descriptions
Wired LAN
(DCP-T820DW/
DCP-T825DW)
TCP/IP DNS Server
(DCP-T820DW/
DCP-T825DW)
Specify the IP address of the primary or
secondary DNS server.
APIPA
(DCP-T820DW/
DCP-T825DW)
Set the machine to allocate the IP
address from the link-local address range
automatically.
IPv6
(DCP-T820DW/
DCP-T825DW)
Turn the IPv6 protocol on or off.
Ethernet
(DCP-T820DW/
DCP-T825DW)
- Select the Ethernet link mode.
Wired Status
(DCP-T820DW/
DCP-T825DW)
- View the current wired status.
MAC Address
(DCP-T820DW/
DCP-T825DW)
- View the machine's MAC address.
WLAN(Wi-Fi) Find Network
- Configure your wireless network settings
manually.
TCP/IP BOOT Method
Select the Boot method that best suits
your needs.
IP Address
Enter the IP address.
Subnet Mask
Enter the Subnet mask.
Gateway
Enter the Gateway address.
Node Name
Enter the Node name.
WINS Config
Select the WINS configuration mode.
WINS Server
Specify the IP address of the primary or
secondary WINS server.
DNS Server
Specify the IP address of the primary or
secondary DNS server.
APIPA
Set the machine to allocate the IP
address from the link-local address range
automatically.
IPv6
Turn the IPv6 protocol on or off.
WPS/PushButton
- Configure your wireless network settings
using the one-button push method.
WPS/PIN Code
- Configure your wireless network settings
using WPS with a PIN.
WLAN Status Status
View the current wireless network status.
Signal
View the current wireless network signal
strength.
SSID
View the current SSID.
Comm. Mode
View the current Communication mode.
MAC Address
- View the machine's MAC address.
WLAN Enable
(DCP-T520W/
DCP-T525W/
- Turn the wireless network connection On
or Off.
459