SERVICE
UPDATE No.
F1249
NO PAPER FEED Message, Clicking Noise
DCP9040CN, DCP9045CDN, MFC9440CN & MFC9840CDW
March 3, 2008
Page 7 of 10
5. Locate the white lever shown in figure 2. The green lift arm will raise this lever when the paper feed
frame is installed in the machine.
Figure 2
6. Slide the paper feed frame assembly to the left while pushing up on the roller holder assembly, this lever
will not move up unless released by pushing the PU lift cam back, as shown in figure 3.Do not release
the roller holder, because it will come back down again.
Figure 3
To Next Page
Loading...
