Brother GT-3 Series - Page 4

35
Seconds
35
Seconds
3,30
Minutes
Pre
Treatment
1/2 distilled
water
Ink
Curing
Heat Press
Ink
Curing
Tunnel Dryer
5 - 5,5
Bars
75 - 80
PSI
0,7 - 1,4
Bars
10 - 20
PSI
180°C
360°F
180°C
360°F
160°C
320°F
HEAT PRESS SETTINGS for Pre-Treatment
HEAT PRESS & TUNNEL CURING SETTINGS
1
2
3
4
Shake well all the White cartridges during 45-60 seconds
White Tube Flush > All Whites
Print a Nozzle Check and perform PrintHead Cleanings if necessary
Check the environmental conditions for best print result:
> min. temperature 18° & min. 45% humidity
DAILY MAINTENANCE
3