Brother GTX-4 - 2-5. Bottom View of Platen

20
Installing the network print driver
1) Connect the printer and PC to a network using LAN cables
and turn the printer power ON.
2) Windows 7: [Control Panel] -> [Devices and Printers]
Windows 8.1: [Control Panel] -> [View devices and printers]
Windows 10: [Settings] -> [Device] -> [Devices and Printers]
3) Click on [Add a printer]
4) Windows 7: Click on [Add a local printer]
Windows 8.1: [The printer that I want isn't listed] -> Select
[Add a local printer or network printer with manual settings]
-> [Next]
Windows 10: [The printer that I want isn't listed] -> Select
[Add a local printer or network printer with manual settings]
-> [Next]
5) Select [Create a new port] -> From [Type of port], select
[Standard TCP/IP Port] -> [Next]