Brother GTX-4 - Menu Structure

26
What to do in the White Ink Pause Mode
For the White ink pause mode, perform the following steps
using "GTX-4 Maintenace".
Menu name
When in White Ink Pause
Mode
1
[Initial settings after
head replacement]
Performed for color head
only
Upon completion of color
head setting, click [Cancel]
to close the maintenance
tool once and then start it.
Then proceed to the
following steps.
2 [Firing Adjustment]
Performed for color head
only
Upon completion of color
head setting, click [Cancel]
to close the maintenance
tool once and then start it.
Then proceed to the
following steps.
3
[Platen-rolling
adjustment]
Performed
4 [White/Color Alignment] Not required
5
[Setting of the time
displayed on the nozzle
check pattern]
Performed
TIPS
For information on the White ink pause mode,
see "7-3. What to do in the White Ink Pause
Mode" in the Instruction Manual.
4) When the completion screen appears, click [OK] to finish the
operation.
TIPS
If you want to check the value you have set, do
not perform the above procedures as a means
to verify them. The setting will be reset and
returned to the initial value.
To check the value in a proper way, refer to the
Instruction Manual.