Brother GTX pro Bulk - Checking the installation site

1
Installation
IMPORTANT
The ink pouch for use in the initial installation
should be sent in advance to the location where
to install the printer and stored indoor.
*If you use ink at extremely low temperature
when the outside temperature is low or in the
cold season, the ink becomes hard to flow
during ink installation.
 The following environmental requirements should be met:
Environment Temperature Humidity
Keeping your
printer
0°C (32°F) to
40°C (104°F)
20 % to 85 %
(no condensation)
Working
Environment
*1
10°C (50°F) to
35°C (95°F)
Recommended
Print Environment
*2
18°C (64.4°F)
to 30°C (86°F)
35% to 85 %
(no condensation)
Electrical
Requirements
Power
Power
Consumptions
―
Single-phase
100-240 V,
50/60 Hz
160 W
*1
: Environmental range where the printer can be operated.
*2
: Environmental range where sufficient printing quality can be
secured.
X0356
Checking the installation site
1
X0355
17.7 in. (45 cm) or more
106.3 in. (270 cm)
or more
39.4 in. (100 cm) or
more
39.4 in. (100 cm)
or more
15.7 in. (40 cm)
or more
Exhaust opening
Exhaust
39.4 in. (100 cm)
or more
148.8 in. (378 cm)
or more
A
lign with the corner
A
lign with the front side
A
lign with the corner
A
lign with the front side