Brother GTX pro Bulk - Page 26

15
Setu
p
of the
p
rinte
r
2.
Insert the head firmly to direction a.
TIPS
If the print head is not inserted sufficiently, the
part as illustrated in (b) could come into contact
with its bottom surface, which in turn may result
in poor printing. Make sure to insert it to the end.
CAUTION
When mounting the head, be careful not to move the
carriage as much as can be avoided. Your hand may be
caught in the carriage and injured. In addition, the tubes
may be rolled together possibly damaging them.
3.
Push with force in the direction as indicated in s so that the (c)
area makes contact with the side of the metal plate of the head.
CAUTION
When you mount d, hold it down from the top. Otherwise
your finger may be pinched and injured.
①
① ①
(b)
(b)
X0375
②
(c)
③
X0376
white side (white color)
color side (red)