Brother GTX pro Bulk - Connecting via LAN

24
Assignment of printer static IP address
TIPS
The printer may not be recognized depending
on your security environment. Consult the
system administrator of the setting site.
The static IP address can also be set on the
printer. For details, refer to the Instruction
Manual.
1) Perform the procedures of "P.23 When connecting via USB".
2) Start menu -> " Brother GTX pro Tools " -> Activate " GTX
pro Maintenance "
3) Select [Set an IP Address] -> [Next]
4) Select the setting method -> [Next]
When connecting via LAN
2-B