v
SAFETY INSTRUCTIONS
CAUTION
Maintenance
When replacing parts and installing optional
accessories, be sure to use only genuine Brother
parts. Brother will not be held responsible for any
accidents or problems resulting from the use of
non-genuine parts.
When replacing parts or installing optional
accessories, be sure to follow the procedures
described in the Instruction Manual. Incorrect
procedures could cause injuries or problems.
IMPORTANT
Printing
Do not move the platen by hand. Otherwise the
printer may be mechanically and electrically
damaged.
Ensure there is adequate space left in front of the
printer and avoid placing any objects. The platen
may be hit and damaged.
NOTE
Use the printer in an area which is free from
sources of strong electrical noise such as electrical
line noise or static electric noise. Sources of strong
electrical noise may cause problems with correct
operation.
Any fluctuations in the power supply voltage should
be within ±10% of the rated voltage for the printer.
Voltage fluctuations which are greater than this
may cause problems with correct operation.
The power supply capacity should be greater than
the requirements for the printer’s power
consumption. Insufficient power supply capacity
may cause problems with correct operation.
In the event of an electrical storm, turn off the
power and disconnect the power cord from the wall
outlet. Lightning may cause problems with correct
operation.
To Next Page
Loading...
