Brother GTX600NB - Before Using Your Printer

1
Installation
IMPORTANT
The ink bottle for use in the initial installation
should be sent in advance to the location where
the printer is to be installed and stored indoors.
*If you use ink at extremely low temperature
when the outside temperature is low or in the
cold season, the ink becomes hard to flow
during ink installation.
 The following environmental requirements should be met:
Environment Temperature Humidity
Humidity (%)
0°C (32°F) to
40°C (104°F)
20 % to 85 %
(no condensation)
Working
Environment
*1
10°C (50°F) to
35°C (95°F)
Recommended
Print Environment
*2
18°C (64.4°F)
to 30°C (86°F)
35% to 85 %
(no condensation)
Electrical
Requirements
Power
Power
Consumptions
―
Single-phase
200-240 V,
50/60 Hz
5 A max.
*1
: Environmental range where the printer can be operated.
*2
: Environmental range where sufficient printing quality can be
secured.
X1016
Checking the installation site
1
116.5 in. (296 cm)
or more
31.5 in. (80 cm)
o
r
more
31.5 in. (80 cm)
or more
129.5 in. (329 cm)
or more
15.7 in. (40 cm)
or more
31.5 in. (80 cm)
or more
17.7 in. (45 cm) or more