For Macintosh with USB users only
(iMac and Power Macintosh G3 with USB / Not HL-1030)
You can setup the printer following the Initial Setup instructions on the supplied CD-ROM.
Step 1 Insert the CD-ROM
Turn on your Macintosh power. Insert
the CD-ROM into the CD-ROM drive.
This Window will appear automatically.
Step 2 Initial Setup
To view the Initial Setup operations in
the video movie, click this icon.
Step 3 Install the printer driver
To install the printer driver, click this
icon. The setup is completed.
To Next Page
Loading...
