For Windows
®
users only
Problem Recommendation
The printer cannot print.
"There was an error
writing to LPT1: (or
BRUSB) for the printer.”
error message displays on
your PC.
• Check that the printer is turned on.
• Check that the front cover is fully closed.
• Check that there is paper in the paper cassette or manual
feed slot.
• Check that the power plug is connected correctly.
• Check that the printer cable is connected securely.
• Check that the printer cable is not damaged or broken.
- Exchange it with another one.
• Check if you have selected another printer through and
interface switching device.
The USB driver is
installed, but it is unable
to find the BRUSB:port
1 Double-click the file "DeinsUSB.exe" in the USB
directory of the CD-ROM.
2 Turn the printer off then on again.
3 The "Add New Hardware Wizard" will be launched again.
Follow the instructions in the Wizard to re-install the
driver.
For Macintosh users only
Problem Recommendation
HL-1240 (or HL-1250 or
HL-1270N) does not
appear in Chooser.
• Check that the printer is turned on.
• Check that the USB interface cable or Network cable is
connected correctly.
• Check that the printer driver is installed correctly.
To Previous Page
Loading...
