Step 3 Install the printer driver
1. If you click the Now button, you
can install the printer driver and
Fonts immediately.
2. After the printer driver has been
installed, the HL-1030/1240/1250/
1270N window will appear. Follow
the on-screen messages to complete
the installation.
If your printer is connected using a parallel interface cable, the setup is now
completed. If you want to connect your printer using a USB interface cable, see
‘For Windows
®
users with USB only (Windows
®
98 / Not HL-1030)’
later in these instructions.
When you want to connect your printer to a network, refer to the “Quick Network
Setup Guide”.
To Next Page
Loading...
