CHAPTER 1 ABOUT THIS PRINTER
1-26
2. Open the rear cover.
3. Send the print data.
4. Using both hands, slide the manual feed paper
guides to the transparency width.
5. Using both hands, insert the transparency into
the manual feed slot until its front edge
touches the paper feed roller. Hold the
transparency in this position until the printer
automatically feeds it in a short distance, and
then let go of the transparency.
6. After the printer ejects the printed transparency, the printer will wait until you insert
the next transparency. Repeat Step 5 for each transparency you want to print.
7. After you finish the print job, close the rear cover.
To Next Page
Loading...
