CHAPTER 4 OPTIONS
4–9
☛
☛☛
☛ 5. Insert the network board connector firmly into the connector of the main
controller board, and then secure it with the two screws.
Fig. 4-7
☛
☛☛
☛ 6. Secure the metal plate with the three screws in the order shown.
Fig. 4-8
☛
☛☛
☛ 7. Close the side cover.
☛
☛☛
☛ 8. Connect one end of the Ethernet Cable to the Network port of the printer.
☛
☛☛
☛ 9. Plug the power cord into the AC outlet, and then turn on the power switch.
☛
☛☛
☛ 10. For more details about how to optimize the Network board, please refer to
the Network User’s Guide on the CD-ROM supplied with this printer.
①
①①
①
③
③③
③
②
②②
②
To Next Page
Loading...
