Brother HL-5030 - Page 127

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-30
(4) Remove the three cup B M3x10 Taptite screws, and then remove the star wheel holder.
Fig. 4-51
(5) Remove the cup B M3x12 Taptite screw.
(6) Release the thermistor ASSY harness from the four hooks.
(7) Remove the thermistor ASSY.
Fig. 4-52
Thermistor relay
PCB ASSY
Taptite, cup B M3x10
Fixing unit
Pins
Pin
Star wheel holder
Taptite, cup B M3x12
Fixing unit
Thermistor ASSY
Hooks
Hook
Thermistor relay
PCB ASSY
Thermistor ASSY harness