20
MacintoshWired Network
For Wired Network Interface Cable Users
6
Connect the printer to
your Macintosh and
install the driver
a Connect the network interface cable to the LAN
connector marked with a symbol and then
connect it to a free port on your hub.
b Make sure the printer power switch is on.
c Turn on your Macintosh. Put the supplied CD-
ROM into your CD-ROM drive.
d Double-click the HL5300 icon on your desktop.
Double-click the Start Here icon. Follow the
on-screen instructions.
e Click Install Printer Driver on the menu
screen.
f Click Network cable users and follow the
on-screen instructions. Then, restart your
Macintosh.
g The Brother software will search for the Brother
printer. During this time the following screen
will appear.
Note
Please see the User’s Guide on the CD-ROM to
install the PS driver (Brother’s BR-Script Driver).
To Next Page
Loading...
