Brother HL-L2370DN - Change the Check Paper Size Setting

Home > Paper Handling > Paper Settings > Change the Check Paper Size Setting
Change the Check Paper Size Setting
Related Models: HL-L2350DW/HL-L2357DW/HL-L2370DN/HL-L2375DW
When you turn on your machine's Check Size setting, the machine displays a message when you remove a
paper tray, asking if you changed the paper size and paper type.
The default setting is On.
1. Press a or b to display the [General Setup] option, and then press OK.
2. Press a or b to select the [Tray Setting] option, and then press OK.
3. Press a or b to select the [Check Size] option, and then press OK.
4. Press a or b to select the [On] or [Off] option, and then press Go.
Related Information
• Paper Settings
27