To Next PageTo Next Page
Need help?Do you have a question about the Brother HL-L2460DW and is the answer not in the manual?
General| Print Resolution | Up to 2400 x 600 dpi |
|---|---|
| Duplex Printing | Yes |
| Weight | 15.9 lbs |
| Operating System Compatibility | Windows, macOS, Linux |
| Printer Type | Laser |
| Standard Paper Capacity | 250 sheets |
| Connectivity | USB, Wireless |
| Mobile Printing | Yes |
| Dimensions | 14.2 x 14.2 x 7.2 inches |
Indicates a potentially hazardous situation resulting in death or serious injuries.
Indicates a potentially hazardous situation resulting in minor or moderate injuries.
Indicates a potentially hazardous situation resulting in property damage or loss of functionality.
Specifies operating environment, installation conditions, or special conditions of use.
Warns not to touch hot product parts.
Indicates actions that must not be performed.
Alerts to the possibility of electric shock.
Alerts to the possibility of a fire.
Identifies specific buttons on the control panel or computer screen.
Emphasizes important points or refers to related topics.
Identifies messages on the product's LCD.
General safety warning about product placement and environmental conditions.
Recommends placing the product where temperature is 50-90.5°F and humidity is 20-80%.
Do not place near heaters, water, or condensation sources to prevent hazards.
Avoid direct sunlight, heat, open flames, corrosive gases, and chemicals.
Use stable surfaces and ensure ventilation slots are not blocked to prevent overheating.
Shows required clearances for products with and without scanning function.
Place on a flat, stable surface near a telephone jack and grounded outlet.
Place in safe location, secure cords, ensure easy access to unplug.
Do not place objects on or near product; avoid magnetic fields affecting quality.
Ensure ventilation for ozone and chemical substances emitted during printing.
Unplug all cords before accessing internal parts due to high-voltage electrodes.
Do not insert objects into slots or openings to avoid contact with voltage points.
Handle plug with dry hands, ensure full insertion, and check cord condition.
Unplug and clean plug regularly to prevent dust accumulation causing short circuits.
Connect only to an AC power source within the rating label range.
Keep plastic bags away from children to avoid suffocation danger.
Refer servicing to authorized center; self-servicing may void warranty.
Unplug and contact service if product is dropped, damaged, or liquids/objects get inside.
Do not use during thunderstorms due to risk of lightning-related electrical shock.
Do not use flammable substances, sprays, or solvents for cleaning to avoid fire.
Do not operate with paper jams; contact with fuser unit can cause fire.
Do not use vacuum cleaners for toner dust; clean with soft cloth to prevent fire.
Do not place metal objects on the product to prevent fire or electrical shock.
Do not place liquid containers on product to prevent spills and electrical shock or fire.
Internal parts are hot after use; wait 10 minutes before touching.
If product overheats, smokes, or smells, unplug and contact service.
Use caution with telephone lines; do not touch uninsulated wires or install during thunderstorms.
Use the grounded plug with a grounded outlet; do not defeat its purpose.
Prevent cord obstruction, strain, or damage to avoid shock or fire.
Use only provided or specified cables; avoid extension cords.
Be careful not to put fingers in illustrated areas to prevent injury.
Unplug the product from the power outlet when not used for a long time.
Do not eat silica gel packs; dispose of them and seek medical attention if ingested.
Keep toner from children; seek medical attention if toner dust is swallowed or contacted.
Clean toner spills immediately; follow instructions for inhalation, skin, or eye contact.
Avoid running hands over paper edges as they may be sharp and cause injury.
Maintain a distance of 20 cm from sides to avoid electromagnetic radiation exposure.
Do not remove or damage caution or warning labels inside the product.
Do not connect to switched outlets or circuits with high electricity demand.
Do not place objects on top of the product, as it may cause malfunction.
Unplug and contact service for liquid spills, water exposure, or performance changes.
Adjust only specified controls; improper adjustment may cause damage.
Follow safety precautions for fax equipment to reduce fire, shock, and injury risks.
Do not use fax near water, wet locations, or during thunderstorms; use provided cord.
Use a No. 26 AWG or larger telecommunication line cord for safety.
Install near an accessible AC outlet; unplug in emergency to shut off power.
Disconnect all cables from wall outlet before installation, servicing, or modification.
Brother disclaims warranties and liabilities for damages resulting from information use.
Explain reason for call, call during off-peak hours for test calls to emergency numbers.
Details FCC Part 68 compliance, product identifier, and modular jack requirements.
Telephone company changes may require user modification for service continuity.
Contact Customer Service for repair/warranty; disconnect if equipment harms the network.
Declaration of product compliance with FCC Part 15 rules for digital devices.
Explains potential RF interference and measures to correct it.
Wireless network transmitters must not be co-located or operated with other antennas/transmitters.
Changes not approved by Brother may void user's authority to operate equipment.
States compliance with FCC/IC radiation exposure limits and required minimum distance from body.
Equipment operation subject to conditions of no harmful interference and acceptance of interference.
Device compliance with Industry Canada's licence-exempt RSSs and operating conditions.
Explains IES for telephone interfaces and the sum limit of devices.
Equipment certified as Class 1 laser product, meaning no hazardous laser radiation.
U.S. FDA regulations for laser products manufactured after Aug 2, 1976.
Warning against using controls other than specified, which may cause hazardous radiation exposure.
Overseas use of USA/Canada models may violate regulations and void warranty.
Caution against connecting to a LAN connection subject to over-voltages.
Product meets ENERGY STAR specifications for energy efficiency.
Notes illegality of reproducing certain documents; consult authority for specifics.
Lists US/Canadian government documents that may not be copied or scanned.
Provides contact information for requesting a printed version of the Online User's Guide.
