Level 1 Level 2 Description
Interface Auto IF Time
Set the time-out period for the auto interface selection.
Input Buffer
Increase or decrease the input buffer capacity.
Inputprime
(Available only for
certain models)
Select if you want to use the signal of parallel ports as a reset.
Delete Storage Macro ID
Delete the registered Macro data.
Font ID
Delete the registered Font data.
Format
Restore the Macro and Font data of your machine to the default
settings.
[Print Menu]
Level 1
Level 2 Description
Emulation
- Choose the emulation mode.
Auto Continue
- Select this setting if you want the machine to clear paper size errors or
media type errors, and use paper from other trays.
Paper Type
- Set the type of paper.
Paper Size
- Set the size of paper.
Copies
- Set the number of printed pages.
Orientation
- Set pages to print in either portrait or landscape orientation.
Print Position X Offset
Move the print start position (at the top-left corner of pages) horizontally
up to -500 (left) to +500 (right) dots in 300 dpi.
Y Offset
Move the print start position (at the top-left corner of pages) vertically up
to -500 (up) to +500 (down) dots in 300 dpi.
Auto FF
- Allow the machine to print any remaining data automatically.
HP LaserJet Font No.
Set the font number.
Font Pitch
Set the font pitch.
The Font Pitch menu appears when you choose I012 to I018, I031
to I037 or I097 to I109 in Font No. setting.
Font Point
Set the font size.
The Font Point menu appears when you choose I000 to I011, I019
to I030 or I038 to I096 in Font No. setting.
Symbol Set
Select the symbol or character set.
Table Print
Print the code table.
Auto LF
ON: CR -> CR+LF, OFF: CR -> CR
Auto CR
ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR
OFF: LF -> LF, FF -> FF, or VT -> VT
Auto WRAP
Choose whether a line feed and carriage return will happen when the
machine reaches the right margin.
Auto SKIP
Choose whether a line feed and carriage return will happen when the
carriage position reaches the bottom margin.
Left Margin
Set the left margin at column 0 to 70 columns at 1 cpi.
Right Margin
Set the right margin at column 10 to 80 columns at 1 cpi.
Top Margin
Set the top margin distance from the top edge of the paper.
Bottom Margin
Set the bottom margin distance from the bottom edge of the paper.
Lines
Set the number of lines on each page.
324
To Next Page
Loading...
Need help?
General
Weight and Dimensions
