Need help?Do you have a question about the Brother KR-830 and is the answer not in the manual?
General| Brand | Brother |
|---|---|
| Model | KR-830 |
| Category | Sewing Machine |
| Language | English |
Steps for attaching the ribber to the knitting machine, including securing, connecting arm, and carriage setup.
Setting up essential components like the yarn tension unit and reinforcing arm for proper operation.
Understanding the tension dial and slide lever for fabric control and settings.
Details on needle positions, half pitch lever, and racking grip handle for pattern creation.
Using bracket and slight adjusting levers for knitting thicker yarn and managing dropped stitches.
Instructions for using bracket spacers with specific ribber models for thicker yarn.
Procedures for disconnecting the carriage and removing the connecting arm.
Instructions for using cast-on combs and weights for starting and balancing the knitting.
Explains the use of wire-loop hangers, work hooks, presser plates, and fine knitting bars.
Steps for casting on and arranging needles for 1x1 rib knitting.
Performing the first row of knitting and creating a perfect selvedge for 1x1 rib.
Setting up carriages and needles for casting on 2x2 rib.
Creating the selvedge and performing 2x2 rib knitting, including an alternative method.
Steps for casting on and arranging needles for full needle rib knitting.
Creating the selvedge and performing the knitting process for full needle rib.
Setting carriages for casting on and creating the selvedge for 5x5 rib.
Setting carriages and casting on for circular knitting, including tension checks.
Arranging needles, performing first row, and continuing circular knitting.
Casting on and performing sequential knitting steps for "U" style knitting.
Casting on and knitting English rib, with notes on weight hangers.
Casting on and knitting the fisherman's rib pattern.
Setting up for tucking pattern knitting using punch cards and specific controls.
Showcasing additional tucking patterns knitted using the same method.
Casting on and creating the selvedge for racking pattern of English rib.
Steps for knitting racking patterns in English rib, adjusting indicators and carriage movements.
Casting on and setting up the selvedge for Racking Pattern (I).
Knitting Racking Pattern (I) by transferring stitches and adjusting the racking indicator.
Casting on and setting up the selvedge for Racking Pattern (II).
Knitting Racking Pattern (II) by transferring stitches and adjusting the racking indicator.
Techniques for increasing single or multiple stitches using simple or full fashioned methods.
Techniques for decreasing single or multiple stitches using simple or second methods.
Steps for decreasing the knitting part in partial ribbing, including needle and carriage movements.
Procedures for decreasing and increasing knitting parts in racking patterns.
Detailed steps for transferring stitches from a purl needle to a plain needle.
Transferring stitches from a plain needle to a purl needle.
Method for binding off stitches using yarn from rib knitting, similar to selvedge creation.
Steps for picking up single or multiple dropped stitches using tools.
Technique for unravelling rows of knitting without removing the work.
Procedures for disconnecting, addressing, and reconnecting the carriage after a jam.
Steps to remove the ribber and convert the knitter for single bed operation.
Step-by-step guide for replacing a purl needle in the ribber.
Daily maintenance tasks including cleaning, polishing, and oiling the machine.
To Next Page
