Why is the thread not being trimmed on my Brother LK3-B430?
If the thread is not trimmed on your Brother Sewing Machine, install the guide in a straight line with the shuttle race body, because the moving blade may not be scooping up the upper thread.
Why is the shuttle not separating the thread on my Brother LK3-B430?
If the shuttle does not separate the thread on your Brother Sewing Machine, install the guide in a straight line with the shuttle race body, because the position of the thread guide of the shuttle race may be the issue.
What to do if the clearance between the needle and tip of the shuttle hook is too large on my Brother LK3-B430 Sewing Machine?
If the clearance between the needle and tip of the shuttle hook is too large on your Brother Sewing Machine, adjust the clearance between the needle and shuttle hook.
Why is the presser foot not rising on my Brother LK3-B430 Sewing Machine?
If the presser foot does not rise on your Brother Sewing Machine, adjust the tension of the brake tension spring, because the brake tension spring tension may be too great.
What to do if the thread take-up spring is weak on my Brother LK3-B430?
If the thread take-up spring is weak on your Brother Sewing Machine, adjust the tension and height of the thread take-up spring.
General| Brand | Brother |
|---|---|
| Model | LK3-B430 |
| Category | Sewing Machine |
| Language | English |
Details the interconnected mechanisms of the needle bar, thread take-up, lower shaft, and shuttle.
Explains the function and operation of the power work clamp lifter system.
Describes the operation and function of the thread wiper mechanism.
Details the mechanism controlling the width of the tack stitch.
Explains the mechanism responsible for setting the tack stitch length.
Explains how thread tension is applied and maintained.
Describes the system for releasing thread tension.
Instructions for removing and disassembling the machine's covers.
Procedure for disassembling the presser arm assembly.
Steps for disassembling the shuttle and related parts.
Procedure for disassembling the needle bar components.
Steps involved in disassembling the threading mechanisms.
Disassembly instructions for the power work clamp lifter.
Procedure for disassembling the feed mechanism.
Steps for disassembling the clutch and brake systems.
Procedure for disassembling the thread trimmer mechanism.
Steps for disassembling the pulley assembly.
Instructions for assembling the pulley system.
Procedure for assembling the thread trimmer mechanism.
Steps for assembling the clutch and brake systems.
Procedure for assembling the feed mechanism.
Instructions for assembling the power work clamp lifter.
Procedure for assembling the threading components.
Steps for assembling the needle bar and related parts.
Procedure for assembling the presser arm.
Steps for setting clearances for main and sub tension discs.
Procedure for positioning the movable knife.
Adjustments related to needle bar height, stroke, and driver contact.
Adjustments concerning the feed mechanism and reference needle positions.
Adjustments for vertical shaft components like roller holder and worm wheel.
Adjustments for the clutch and brake systems, including timing and pressure.
Adjustments for the power drive lever and work clamp height.
Adjustments for movable knife position and timing.
Adjustments for thread take-up lever stroke and tension discs.
Adjustments for thread wiper height and stroke.
Procedure for changing stitch type to knitted stitches.
Procedure for changing stitch type to denim stitches.
To Next Page
