CONTENTS
Removing order of covers....................................................................................................................................1
Clearance between the needle and the shuttle hook point (Shuttle race position)........................................2
Clearance between the shuttle driver and the race way...................................................................................3
Needle swing (Parabola).......................................................................................................................................4
Needle down centering.........................................................................................................................................5
Needle position on zigzag to the needle plate...................................................................................................6
Loop lift..................................................................................................................................................................7
Height of the needle bar.......................................................................................................................................8
Tension of the timing belt.....................................................................................................................................9
Height of the feed dogs......................................................................................................................................10
Height of the presser bar....................................................................................................................................11
Stitch length for forward and backwards stitching.........................................................................................12
Upper tension control dial..................................................................................................................................13
Bobbin Winding...................................................................................................................................................14
Adjustment of lower thread tension..................................................................................................................15