6
Always make sure the plug is fully inserted. DO NOT use the product or handle the cord if the
cord has become worn or frayed.
If the product has been dropped or the casing has been damaged, there may be the possibility
of an electric shock. Unplug the product from the AC power outlet and contact Brother
Authorized Service Personnel.
DO NOT allow this product to come into contact with water. This product should not be used
around standing water, including a bath tub, sink, or swimming pool; around appliances
containing water, including a refrigerator; or in a wet basement.
If water, other liquids, or metal objects get inside the product, immediately unplug the product
from the AC power outlet and contact Brother Authorized Service Personnel.
DO NOT dismantle this product. Dismantling this product could cause a fire or electric shock.
DO NOT attempt to service this product yourself. Opening or removing covers may expose you
to dangerous voltage points and other risks and may void your warranty. Refer all servicing to
a Brother Authorized Service Center.
This product should be connected to an AC power source within the range indicated on the
rating label. DO NOT connect it to a DC power source or inverter. If you are not sure what kind
of power source you have, contact a qualified electrician.
To Next Page
Loading...
Need help?
General
