Brother MFC-L2712DN - Page 90

9.34
Front
cover
sensor
(1)
Remov
e the Gear to
ner box idl
e 32 and the Se
ctor gear to
ner box fro
m the Hold
er toner
box. (Only for
models with Toner box)
(2)
Remov
e the Spr
ing secto
r gear toner box fr
om the Hook of H
older tone
r box and the Hook
of Lever solenoid. (Only for
models with T
oner box)
(3)
Remov
e the four T
aptite bin
d B M4x12 screw
s, and remove th
e Holder tone
r box and the
Lift cam guide from the Frame
L unit. (For models
with T
oner box)
Remove the two Taptite bind B M4x12 screws, and remove the
Lift cam guide from the
Frame L unit. (For models without Toner box)
(4)
Relea
se each H
ook to re
move th
e Front co
ver sen
sor from
the Fram
e L unit
.
Fig. 3-97
Gear toner box idle 32
Spring sector gear toner box
Sector gear toner box
Hook of Holder toner box
Hook of Lever
solenoid
Taptite bind B M4x12
Taptite bind B M4x12
Lift cam guide
Holder toner box
Front cover
sensor
Hooks
Frame L unit
Lever solenoid