Brother ML-300 User Manual

Explains the traditional typing method where characters print immediately.

Describes typing with characters shown on the display before printing.

Details paper insertion, index/reverse index, and view mode functions.

Explains how to adjust vertical separation and character density.

Explains setting margins, regular tabs, and decimal tabs for alignment.

Covers typing uppercase characters and managing carrier return.

Explains simple, express, and half backspacing operations.

Explains how to fix single characters, words, or entire lines using memory.

Details deleting an entire typed line.

Explains manual correction of errors on other lines.

Covers typing characters above/below baseline and special symbols.

Explains automatic underlining and using dead keys for accents.

Covers making text bold and indenting lines for formatting.

Explains how to center text between left and right margins.

Explains aligning text to the right margin automatically.

Explains how to exit centering and right margin flush modes.

Explains how lines are displayed and printed sequentially.

Details correcting characters, words, and lines in display mode.

Shows how bold, underline, and super/subscript appear on display.

Lists keys that initiate line printing from display mode.

How to define, print, and type text within frames.

Instructions for activating, deactivating, and rechecking words.

Instructions for replacing the cassette ribbon and daisy wheel.

Steps for replacing the correction tape.

Solutions for the typewriter not powering on or printing.

Solutions for problems with correction tape performance.

Guidelines for cleaning and locating the typewriter.

Technical details and capabilities of the typewriter.

Details the contents of the starter kit.