MW-140BT Quick Guide (English) MW-140BT Quick Guide (English)
1-2
English
Declaration of Conformity
We BROTHER INDUSTRIES, LTD.
15-1, Naesiro-cho, Mizuho-ku,
Nagoya 467-8561, Japan
declare that the MPrint MW-140BT conforms with the following
normative documents:
EMC: EN 55022:1998 Class B
EN 55024:1998
EN 61000-3-2:1995
EN 61000-3-3:1995
and follows the provisions of the Electromagnetic Compatibility
Directive 89/336/EEC (as amended by 91/263/EEC and 92/31/
EEC). The optional AC adapter also conforms with EN 60950
and follows the provisions of the Low Voltage Directive 73/23/
EEC.
Issued by: BROTHER INDUSTRIES, LTD.
P & H company
Development DIV.
¡
This products bearing the CE marking comply with the R&TTE
Directive (1995/5/EC), EMC Directive (89/336/EEC) and the
Low Voltage Directive (73/23/EEC) issued by the Commission
of the European Community.
1-1
1) What is Bluetooth?
Bluetooth is a type of short-range wireless technology that provides wireless
connectivity to users of computers and PDAs equipped with Bluetooth.
2) Precautions for using Bluetooth
Wireless connections are used in a wide range of fields. Therefore, in order to
prevent malfunctions with the following, Bluetooth should be turned off.
• Hospitals
• Aircraft
• Gasoline/Petrol stations
• Fire alarms
3) For better transmission
Bluetooth connectivity varies greatly according to its operating environment.
If a good connection cannot be achieved, try connecting again.
Connections are difficult to achieve in the following locations.
• Near electronic equipment
• Near broadcasting stations or wireless base stations
• Near wireless LAN (IEEE802.11)
4) Other features of Bluetooth technology
• Equipment using Bluetooth technology may require a few seconds until the
Bluetooth function can be used after it is turned on. This length of time differs
depending on the equipment. (This unit requires a maximum of 8 seconds.)
To Next Page
Loading...
Need help?
General