Brother NQ3700D - Setting Up the Wireless Network Connection

LCD Operation
16
Q General settings
1 Select the needle stop position (the needle position for
when the machine is not being operated) to be up or
down.
2 Select whether to hear the beep operation sound.
3 Select whether to display the opening screen when the
machine is turned on.
4 Select the display language.
5 Select whether to turn work area light on or off.
6 Select the level of the input sensitivity for operation keys.
(page 17)
7 Display the service count which is a reminder to take
your machine in for regular servicing. (Contact your
authorized Brother dealer for details.)
8 Display the total number of stitches sewn on this
machine.
9 The [No.] is the internal machine number for your
machine.
0 Display the program version installed on your machine.
Q Wireless LAN settings
1 Enable/disable the wireless LAN function. (page 18).
2 Display the connected SSID. (page 18)
3 Set the machine to connect wireless LAN function. (page
18)
4 Check the wireless LAN status.
5 Display the machine name of wireless LAN function.
6 Change [Machine name].
7 Display a menu to perform other settings or reset the
connection settings of the wireless LAN settings. (page
19)
8 Check the latest version of the software.
The version will display in [Latest Version Available].
9 Display the latest version of the software.
0 Displays a message if [New update on server] is
available for this machine.
If [New update on server] appears, update the machine.
(page 116)
1
2
3
4
5
6
7
8
0
9
1
2
3
4
5
7
6
8
9
0